Gypsum Surface Primer (Satin Gypsum Primer)

Product Description:
It is acrylic emulsion based, transparent, ready-to-use interior surface primer

Surfaces to be Applied:
It is the transparent primer used for the saturation of the absorbent areas in the interior and exterior surfaces of the buildings and for providing homogeneity on the surface. It is used on surfaces where satin gypsum and putty is applied .

Surface Preparation:
Completely dried wall gypsum surfaces on which applications is to be performed, the surfaces should be reinforced before the primer application and it should be cleaned off of any dirt, oil, dust and other particles, should be clean and dry.

Application:
It is applied as a single coat following the surface preparation procedures. The application should definitely be carried out as a single coat and excess application should be avoided .

Thinning Ratio:
Not thinned.

Consumption Quantity:
0.06-0.07 kg/m2 (on a single coat), 13-16 m2 /lt (on a single coat)

Drying Time:
Touch drying: 1 hour, dust dry 4 hours, hard dry 24 hours

Storing Conditions:
Protect from direct sunlight, rain, snow, excessive heat, moisture and frost. Can be stored for 1 year in its original unopened container provided that the storing conditions are observed.

Storage Temperature:
Should be stored between +7 °C to +30° C.

Relative Humidity;
23 ±2 °C % 50 ± 5 real humidity