Wood Protector

Product Description :
It is the solvent based, matt decorative wood protector with synthetic alkyd binder, protecting the wooden surfaces inside and outside from the negative effects of mold, woodworms, fungi, sunrays and weather conditions, by the special additives it contains, which can also be used as colorant by its special transparent pigments. It does not prevent the breathing of the wood it is applied on. Although it penetrates deep into the wood by its high penetration power, it does not fill the pores and it gives a decorative look to the wood without hiding its natural design and texture. It increases the resistance of the wood as well as the adhesion and resistance power of the paint or varnish to be applied on it. It decreases the consumption

Area of Use and Application:
It is used as decorative protector on the interior and exterior surfaces of all the joineries, façade coverings, doors, windows, garden furniture produced of wood. It is ready to use, without thinning. The application surface should be dry, free of dirt, dust, oil, chips and flakes of the older paint/varnish. If required, the surface should be sanded. In the new wood applications, the knots should be burned and resin should be wiped by cellulosic thinner. It is applied by a brush, roller or dipping method, without thinning, as 2-3 coats and by waiting at least 8 hours between the coats. 15-30 minutes after the application, the excess not absorbed by the wood should be wiped off by a pileless and mildly dampened cloth

Drying (20 °C ):
It varies as based on the type and structure of the wood. First drying is 15-30 minutes, second coat application is 8-12 hours, complete drying is 24 hours.

Coverage Area :
It is around 6-12 m2/lt in a single coat.

Storing Conditions :
It is at least 1 year at room temperature in an unopened container. TSEK

Storage Temperature :
Should be stored between +5 °C to +30° C .