Linea Silicone Plastic Paint ( Matt )

Product Description:
Acrylic copolymer based, silicone, matt texture, smooth, decorative interior wall paint.

Application Surfaces:
It is used on any type of walls and ceilings in the interior parts of the buildings.

Surface Preparation Before the Application:
Dirty, dusty, bubbly and old painted surfaces should be scraped and cleaned well. Prime should be applied on the surfaces for better adhesion of the plastic paint to the surface and reduction in the topcoat paint consumption.

Application:
Mix the paint well before use and don't mix with other paints. Primer is applied following the completion of the surface preparation. At least 2 hours after the application of the primer ; LINEA SILICONE INTERIOR WALL PAINT ; is thinned by 20% in volume and applied by brush or roller as two coats. Application is carried out by waiting for 2 hours between the coats.

Thinning Ratio:
Thinned by 20% water.

Coverage Area:
With 1 lt LINEA SILICONE INTERIOR WALL PAINT an area around 10 m2 is painted in single coat as based on the surface. ( 28 ± 5 mic. Dry film thickness)

After the Application:
The surfaces on which LINEA SILICONE INTERIOR WALL PAINT is applied should be protected from rain, snow, frost, excessive heat and physical impacts for a period of 24 hours. Clean your brush and roller after each application.

Storing Conditions:
Protect from direct sunlight, rain, snow, excessive heat, moisture and frost. Can be stored for 2 years in its original unopened container provided that the storing conditions are observed Conforms to TSE 5808.

Storage Temperature:
Should be stored between +5 °C to +30° C .

Relative Humidity:
23 ±2 °C % 50 ± 5 reel rutubet.

SINIFLANDIRMA:
TS 5808/APRIL 2006 : TS EN 13300 CLASSIFICATION

Wet Scrub Resistance

YOD : SINIF 3

Covering Power

CLASS 2 (CONSUMPTION =7,0 M2/LT)

Grain Size

CLASS 1

Gloss

G2

Mold Resistance

K2