EXTRA SİLİKONLU İÇ CEPHE (MAT)

Product Description :
Acrylic copolymer based, silicone, matt, smooth, antibacterial decorative interior wall paint.

Application Surfaces:
It is used on all wall and ceiling surfaces in the interior parts of the buildings.

Surface Preparation Before Application:
Dirty, dusty, bubbly and old painted surfaces should be scraped and cleaned well. Prime should be applied on the surfaces for better adhesion of the plastic paint to the surface and reduction in the topcoat paint consumption.

Application:
Mix the paint well before use and don't mix with other paints. Primer is applied following the completion of the surface preparation. At least 2 hours after the application of the primer; EXTRA SILICONE INTERIOR WALL paint is thinned by 20% in volume and applied by brush or roller as two coats. Application is carried out by waiting for 2 hours between the coats.

Thinning Ratio:
Thinned by 20% water.

Coverage Area:
With 1 lt EXTRA SILICONE INTERIOR WALL an area around 15 m2 is painted as based on the surface. ( 28 ± 5 mic. Dry film thickness)

After the Application:
The surfaces on which EXTRA SILICONE INTERIOR WALL paint is applied should be protected from rain, snow, frost, excessive heat and physical impacts for a period of 24 hours. Clean your brush and roller after each application.

Storing Conditions :
Protect from direct sunlight, rain, snow, excessive heat, moisture and frost. Can be stored for 2 years in its original unopened container provided that the storing conditions are observed. Conforms to TSE 5808.

Storage Temperature:
Should be stored between +5 °C to +30° C .

Relative Humidity:
23 ±2 °C % 50 ± 5 real humidity.

CLASSIFICATION:
TS 5808/APRIL 2006 : TS EN 13300 CLASSIFICATION

Wet Scrub Resistance

YOD : CLASS 2

Covering Power

CLASS 2 (CONSUMPTION =6,7 M2/LT)

Grain Size

CLASS 1

Gloss

G2

Mold Resistance

K2