Eraplast ( Matt Plastic )

Product Description :
It is acrylic copolymer based, matt, economic interior wall paint

Application Surfaces:
It is safely used in interior walls and ceilings, on previously painted, lime-washed, plaster, gypsum and concrete surfaces.

Surface Preparation Before the Application:
If any, old, loose, bubbly paint layer should be cleaned. The cracks on the surface should be filled with acrylic-based putty. The raw surfaces to be painted, especially, lime-washed surfaces should be saturated with Ersan insulation Prime before application. The surfaces on which paint or prime is to be applied, should be clean, dry and free of dust and also excessive wind or air circulation should not be present in the application environment. The surface and ambient temperature should be +7 °C to +30° C between during the application.

Uygulama:
Mix the paint well before use and don't mix with other paints. Primer is applied following the completion of the surface preparation. At least 2 hours after the application of the primer ; ERAPLAST ; is thinned by 15% in volume and applied by brush or roller as two coats. Application is carried out by waiting for 2 hours between the coats.

Thinning Ratio:
Thinned by 15% water.

Coverage Area:
With 1 lt ERAST PLAST, an area around 8-10 m2 is painted in single coat as based on the surface.

After the Application:
The surfaces on which ERAPLAST is applied should be protected from rain, snow, frost, excessive heat and physical impacts for a period of 24 hours. Clean your brush and roller after each application.

Storing Conditions:
Protect from direct sunlight, rain, snow, excessive heat, moisture and frost. Can be stored for 1 year in its original unopened container provided that the storing conditions are observed.

CLASSIFICATION:
TS 5808 /APRIL 2006 : TS EN 13300 CLASSIFICATION

Wet Scrub Resistance

YOD : CLASS2

Covering Power

CLASS 3 (7,0 m2/lt)

Grain Size

CLASS 1

Gloss

G4

Mold Resistance

K2